DuPont Teijin Films has launched the LuxCR depolymerisation process, which upcycles post-consumer waste into BOPET films for a range of applications. The use of recycled content is a critical part of the company’s circular economy strategy, while the upcycling of PET marks an important step forward in the chemical recycling sector.
Although mechanical recycling will continue to play an important role in the circular economy, it does have some limitations with regards to the physical and mechanical properties of the recycled product over repeated cycles and also in the food contact compliance area where certain end use applications are temperature restricted.
The LuxCR process addresses these two issues by depolymerising mechanically recovered PET flake back into the monomer unit bis(2-hydroxyethylterephthalate) or BHET, which is chemically indistinguishable from virgin monomer. This base monomer is then repolymerised into a polyester polymer, which is subsequently converted into a wide range of BOPET films.
Contamination is removed during the process through a combination of monomer and polymer filtration units and by vacuum extraction, which runs for several hours at temperatures between 270-300 deg C.
Initial commercial launches are planned in the second quarter across a range of packaging formats and will include high temperature food contact applications such as ready meal lidding and ovenable flow wrap structures. A wide and varied range of MYLARand MELINEX. products can be produced using post consumer recycled content.
Although the initial focus for the LuxCR process is to provide a feedstock to DuPont Teijin Films’ own film manufacturing lines, feasibility studies are underway to see if the scope can be extended to include the external sale of polymer, which would open up the technology to applications such as PET bottles and trays. There is also work ongoing to assess the feasibility of collecting and recycling MYLAR and MELINEX post industrial waste from DuPont Teijin Films’ direct customers.