Starlinger and PET2PET boost PET recycling

0
197


PET recycling at PET2PET. Picture: Starlinger

With the growing demand for recycled material, the required capacity of the PET recycling line is increasing as well: Together with manufacturer Starlinger recycling technology, the output has recently been raised by 20 %.

The recoSTAR PET 125 HC iV+ installed in 2010.Picture: Starlinger

Located in Austria’s east, the recycling company PET to PET has processed about one billion PET bottles or 25,400 tons in 2018 – a plus of 9 % compared to the previous year. The five largest domestic beverage producers (Coca-Cola, Egger, Rauch, Spitz und Vöslauer) jointly operate the site with the aim of recovering recycled material from local sources for reuse in PET bottles. For these Austrian brand owners, “circular economy” is more than just a buzzword: On average, domestic PET bottles already include 30-50 % of recycled material. Vöslauer even lists a content of roughly 60 % per bottle of mineral water and a planned increase to 100 % within the next years. The flagship of the company is the 0.5 liter bottle, which is made of 100 % recycled PET while using the same amount of material.

Since 2010, PET to PET operates a Starlinger recycling line of the type recoSTAR PET 125 HC iV+. With this line, the pre-cut, washed and sorted flakes are processed into high- quality regranulate. “With Starlinger’s technology, we have chosen one of the safest methods that guarantees thorough decontamination of the material according to the FIFO principle,” says Christian Strasser, Managing Director of PET to PET. “In this regard, the strict requirements of our owners, especially Coca-Cola, greatly influenced our decision when purchasing the line.” Geographical proximity – Starlinger and PET to PET are only about 30 miles apart – also played a role, as it allows short-term spare parts deliveries and swift technical assistance.

Long-term cooperation: Starlinger and PET2PET. Picture: Starlinger

The recycling of plastics is booming, not least because of the EU’s ambitious recycling targets – the circular economy package stipulates a recycling rate of 50 % until the year 2025. Last year, the growing demand for recycled material prompted PET to PET to approach Starlinger recycling technology with the request for an increase in capacity of the recycling line. The customer was convinced that in cooperation with Starlinger’s specialists, an even higher throughput could be achieved. Through a detailed analysis, they jointly identified areas that showed potential for an increase in performance. Based on this analysis, Starlinger recycling technology compiled a package that was integrated into the line in several stages. The upgrade involved numerous process steps such as drying, extrusion, filtration, and energy recovery. „After completion of the revamp, the line runs at 20 % more output with consistent quality and constant IV“, states Christian Lovranich, Head of Process Engineering of Starlinger recycling technology. „By doubling the capacity for energy recovery, we have not only made the line more productive, but also much more energy-efficient. The successful upgrade at PET to PET shows that even after many years of reliable operation, recycling lines can still achieve an increase in performance.”

In PET recycling, the availability of input material is a limiting factor. At present, PET to PET can only partially cover its material needs from Austrian collection systems because the collected PET bottles are also popular among manufacturers of other products as a secondary raw material. Examples of other products made from rPET are films for the food industry and strapping bands. In order to obtain enough raw material for new PET bottles, PET to PET also purchases bales from neighboring countries. At the recycling plant, transparent, blue, and green bottles are processed. The owners may exercise their preemptive right to the regranulate, the rest is sold to interested parties on the free market.

With 3 out of 4 recycled PET bottles, PET recycling is already a prime example of a functioning circular economy in Austria. In the next years, this rate shall be increased even more in order to reach similar top values as Germany (>90 %). “The direction is clear; the technologies are available,” states Christian Strasser. “It lies within the responsibility of the manufacturers to close the circuits and design their products with an eye on recyclability.” Currently, the usage of many different kinds of plastics as well as multi-layered food packaging complicates recycling activities. “For PET bottles, excellent structures for collection and recycling are already in place,” Strasser emphasizes. “Such structures must also be established for other kinds of plastic packaging so that the material streams can be returned to the production process. In addition, our society will need to undergo massive changes in terms of waste reduction and a more responsible use of our limited resources.”



Original Source

LEAVE A REPLY

Please enter your comment!
Please enter your name here

This site uses Akismet to reduce spam. Learn how your comment data is processed.